Install windows via USB flash drive or SD card

INSTALLING WINDOWS 7 WITH USB FLASH OR SD CARD

In this article I will explain to you how to install an operating system on a computer via USB or phone flash. This is a very useful and convenient way to install an operating system. NetBook owners! this article is mainly for you.

So we started, carefully try to do each step correctly. I managed to put the operating system through it myself.

We prepare the USB flash drive for Windows 7 boot.

1. We get a USB flash drive: at least 4GB, there can be an SD card. Connect to a USB port. Caution does not hurt, because it is clear that you will lose your data inside the USB flash drive.

2. Run CMD.EXE on Windows. For those who do not know what it is)))) I remind: PUSK-> VYPOLNIT-> CMD and press ENTER. a black background window appears on the screen. With the permission of the administrator, of course !!!

3. At the Disk Management command, type diskpart, then wait for DISKPART>. There is no harm in waiting, you will learn.

4. Type the list disk command and find your flash drive there. The name of the flash drive is usually called Disk1, but it can be different.

5. select disk # (where # - our USB-drive number, 4 - the number obtained in point) - dial select disk1. This means that all subsequent operations will be performed within this USB flash drive.

6. Clean Clean !!! Goodbye my information !!!

7. To create a new partition on the USB-flash drive - type create partition primary.

8. Type select partition1, then activate it. Type the Active command to activate.

9. Type and format the format fs = NTFS to make the activated partition work in the NTFS file system.

10. The next command is ASSIGN. Activating the process of connecting the device, that is, we get the letters for the generated partitions. Some computers will report that a new flash drive has been connected to the computer after this command.

11. We make a lyrical retreat. I always make a little lyrical retreat when my work is going flawlessly.

So listen:

a. Two flies are perched on the ceiling. The first said:>
"People are stupid!"
- Why?
"They spend a lot of money to decorate the ceiling, and they walk on the floor."

b. Seli v mashinu, kompyutershchik, novyy russkiy i slesar. Zavodyat - not zavoditsya. Slesar says:
- Seychas ya glyanu, chto sluchilos, vse sdelayu - i poedem.
Novy russkiy govorit:
- Sidi, ya seychas po sotovomu pozvonyu, priedet brigada masterov i vse bыstro sdelaet.
A computer says:
- Maybe, all vыydem iz mashiny i snova zaydёm?

)))) We laughed and now we will continue.

12. Type exit to exit Diskpart.

The USB drive is ready for further processes.

Diqqat Diqqat !!! We get a DVD with one of the distributions of Windows 7.

12. Then open the CMD.EXE window again.

13. Go to the letter named for the disc. For example, G:

14. CD \ BOOT - go to the boot directory of the distributor.

15. The next command bootsect / nt60 I: - type the command I: - the letter given for the USB flash drive we prepared. This command packs the boot disk I: Windows 7 bootloader.

The operating system we are running and the Windows 7 distribution on which the bootloader is installed on the USB flash drive must have the same bit (32 bit or 64 bit).

After that, the installed Windows 7 installation packages will be copied to the USB flash drive. This can also be done using xcopy or robocopy commands. Or you can simply copy (CTRL + C and CTRL + V).

16. You can now easily install Windows 7 by connecting a USB flash drive to your netbook.